Views: 305 Author: Site Editor Publish Time: 2021-05-24 Origin: Site
What do rigid-flex board manufacturers need during FPC processing?
As electronic products become thinner and thinner, manufacturers of rigid-software boards are required to become thinner and thinner. Rigid-flex board manufacturers need to undergo high-temperature treatment and withstand a certain acid-base environment. The protective film is required to be easy to apply, easy to peel off, does not warp, and does not pollute the material surface. However, the current general protective film products are not resistant to high temperatures, acids and alkalis, and therefore cannot meet the processing technology requirements of rigid-flex board manufacturers. Therefore, it is necessary to develop a protective film that can withstand high temperature environments and acids and alkalis to meet the process needs of rigid-flex board manufacturers. Experimental raw materials include: acrylic monomers, various functional monomers, initiators, chain transfer agents, curing agents, accelerators, silicone monomers, silicone elastomers, silicone resins, polyester substrates, copper foil, aluminum foil, polyimide films,
Acid and alkali solvents, ethyl acetate, butanone, etc. Therefore, through a series of comparative tests, a modified silicone-modified acrylate pressure-sensitive adhesive with better performance was finally synthesized: the glue has good compatibility, good high-temperature holding power, moderate peel strength value, can withstand acid and alkali solvents, can withstand high temperatures of 200°C for a long time, and does not leave any residual glue on the surface of the adherend. Then the rigid-flex board manufacturer applies the modified glue on the surface of the polyimide base film, and undergoes appropriate high-temperature cross-linking and curing treatment.
Shenzhen Chengzhiyi Circuit Co., Ltd. (CZY) was established in August 2008. It is a one-stop manufacturing service provider specializing in the production of PCB circuit boards, MCPCB metal-based circuit boards and PCBA. A high-tech enterprise integrating R&D, manufacturing and sales. Our products include high-end PCB double-sided multi-layer circuit boards, aluminum substrates, copper substrates, thermoelectric separation copper substrates, rigid-flex boards and PCBA. Products are mainly used in automotive lighting, automotive electronics, 5G communication equipment, industrial electronic control products, high-power electricity, medical equipment, LED lighting products, security facilities, etc. Lean and intelligent manufacturing is our commitment to our customers. The company is a strong factory that has been audited by SGS. It has a full set of automated production and precision testing equipment. It has fast product delivery, high quality and good service. The current monthly output reaches 30,000 square meters.
Rigid-flex board is the best combination of rigid circuit board and flexible circuit integrated into one circuit. The 2-in-1 circuits are interconnected via plated through holes. The advantages of its rigid-flex panels basically include providing the best solution for finished products with limited space. This technology offers the possibility to safely connect device components while guaranteeing polarity and contact stability and reducing plug and connector components.
Other advantages of rigid-flex boards are higher component density and better quality control, resulting three-dimensional design freedom, simplified installation, space savings and maintenance of uniform electrical characteristics.